ETRH6-26 3-Mode Rotary Hammer: The Newest 26mm Flagship

The ETRH6-26 is the newest addition to our 26mm rotary hammer family - and the one we built for buyers who want the full story in a single machine. Its three-mode selector covers drilling, hammer drilling, and chiselling, so one 26mm SDS-Plus tool handles anchor holes, floor chases, and tile removal without a second machine on the belt.

Inside the new-generation housing sits the proven 800W / 3.0J SDS-Plus platform our buyers have stocked since 2002, now wrapped in a redesigned red-and-black body with a locking mode dial, variable-speed trigger, and forward/reverse. It ships from our Taizhou factory with full OEM/ODM support - logo, colour, and packaging under your brand.

What the 3-Mode Selector Changes

A two-mode rotary hammer drills and hammers - and stops there. The ETRH6-26's third mode locks the chuck for straight chisel work: tile lift-off, mortar raking, light channel chasing, and dowel removal. The selector sits on the top of the gearbox where your thumb reaches it, and it locks positively in each position so vibration cannot walk it out of mode mid-hole. If your catalogue only has room for one 26mm machine, this 3-mode rotary hammer is the configuration that covers the most jobs.

Key Features & Benefits

• 3-mode selector with locking dial — Drill, hammer drill, and chisel-only on one dial. The defining feature of this 3-mode rotary hammer - one machine for anchors, fixing, and light demolition.
• 3.0J SDS-Plus impact — Piston-drive impact at 0-3,750 bpm drives 6-26mm holes in concrete and masonry at site pace.
• 800W motor — The standard 26mm-family power plant - fast drilling without the weight penalty of a 900W class machine.
• Variable-speed trigger forward / reverse — Feather the speed for hole starting, reverse to back out jammed bits and set chisel angle.
• Safety overload clutch — When the bit bites rebar, the clutch disengages the drive and protects the gearbox - and your wrists.
• New-generation housing, 360° side handle — Redesigned red-and-black body with a full-adjustable side handle for left- or right-handed chisel control.

Full Specifications

Where the ETRH6-26 Earns Its Keep

• Anchors & fixings in concrete — The daily bread of the 26mm class: 8-16mm anchor and wedge holes in reinforced concrete, at the 3.0J pace trade installers expect.
• Tile removal & light chiselling — Mode 3 turns the ETRH6-26 into a renovation tool - lift floor and wall tiles, rake mortar joints, chase light cable channels.
• Electrical & plumbing installation — Box sinking, conduit clips, and pipe brackets - hammer-drill mode powers through block and slab, rotate-only mode finishes in wood and steel.
• Rental & hire fleets — Three modes in one machine means rental houses cover more customer jobs per unit - and the locking dial survives novice users.
• Distributor newest-catalogue SKU — The model you lead with when refreshing a 26mm shelf: newest body in the family, one SKU covering drill/hammer/chisel demand.

ETRH6-26 vs Other ETpower Models

Seven 26mm Models, One Honest Answer

All seven ETPower 26mm machines drill the same 26mm hole at 3.0J - we say so on every page. What differs is the feel, the feature set, and who the page is written for: the ETRH2-26 is the proven standard, the ETRH3-26 is tuned for grip comfort, the ETRH4-26 for balance, the ETRH5-26 brings the updated body with safety clutch, the ETRH7-26 is the same platform moulded for distributors who want bits, chisels and spares continuity, and the ETRH8-26 is the PROFESSIONAL-badged body for trade crews. The ETRH6-26 is the newest flagship with the locking 3-mode dial. Pick by hand feel and feature priority - not by spec-sheet arithmetic, because the arithmetic is the same.

ETRH6-26 FAQ

What is a 3-mode rotary hammer?

A rotary hammer with three selector positions: rotation-only drilling, rotation plus piston impact (hammer drilling), and chisel-only operation with the chuck locked. The ETRH6-26 covers all three on one dial.

How is the ETRH6-26 different from the ETRH5-26?

Both sit on the 800W / 26mm / 3.0J platform. The ETRH6-26 is the newer body with the locking 3-mode dial positioned for thumb reach; the ETRH5-26 is the updated body focused on the safety-clutch package. Same hole, different feature emphasis.

Can it remove tiles and chip mortar?

Yes - that is exactly what mode 3 is for. For daily heavy demolition we would honestly point you to a dedicated demolition breaker instead; this is a drill that chisels, not a chisel that drills.

What bits does it take?

Any standard SDS-Plus bit from 5mm to 26mm, plus SDS-Plus chisels (flat, pointed, and gouge). The 10mm shank is universal across brands.

Is 3.0J enough for reinforced concrete?

For 6-16mm anchor work, yes - 3.0J is the trade standard for the 26mm class. If your market drills 20mm holes all day, step up to the 900W 28mm ETRH2-28.

Can I order 110V or other voltages?

Yes - 110V for North American and Japanese markets, 220-240V for Europe, the Middle East, and Asia. Other market plugs are specified at order.

Do you offer OEM on the ETRH6-26?

Yes - the new body was designed for private label: your logo, your colour scheme, your packaging and carton art. MOQ and sample lead time on request from our export team.

What is the warranty and duty cycle?

Standard factory warranty applies (terms at order). Rated for intermittent trade duty like the rest of the 26mm family - a full-site workhorse, not a demolition breaker.

Buy Factory Direct

The ETRH6-26 is our newest 26mm build and we are stocking it for launch orders now. For OEM pricing, a sample unit, or to add it to a mixed container with the rest of the 26mm family, contact our export team. See the full line in the Rotary Hammers collection.